How To Jack Up a Zero Turn Mower: A Step-by-Step Guide

how to jack up a zero turn mower

If you’re wondering how to jack up your zero turn mower for maintenance or inspection, you’re in the right place. This guide provides simple, step-by-step instructions that make the whole process easy.

Jacking up a zero turn mower involves locating the appropriate lift points, using a suitable jack, and safely securing the mower in the elevated position. Always ensure the mower is turned off and its wheels are locked before you start.

We’ll dive deeper into the process, offering safety tips and highlighting common mistakes to avoid. You can confidently jack up your zero turn mower with our comprehensive guide.

You may like: Sanctuary Lawn Fertilizer 11-21-21

How To Jack Up a Zero Turn Mower

Disclaimer: Before we delve into the details, it’s crucial to emphasize that the following steps are general guidelines. Always refer to your mower’s owner’s manual for specific instructions and safety precautions. Failure to follow proper safety guidelines may result in accidents or damage to your equipment.

Step 1: Gather the Necessary Equipment

Before starting the jacking process, ensure you have the following equipment ready:

Hydraulic Jack or Floor Jack: Ensure it has the capacity to lift the weight of your zero turn mower.

Jack Stands: These provide additional stability and safety, especially if you need to work under the mower.

Wheel Chocks: Prevent any unintended movement by placing wheel chocks around the wheels that will remain on the ground.

Wrenches and Socket Set: You may need these tools to remove certain components or access parts underneath the mower.

Safety Glasses and Gloves: Protect yourself from debris and sharp edges.

Owner’s Manual: Always refer to your mower’s manual for specific instructions.

Step 2: Choose a Flat and Level Surface

Select a flat and level surface to jack up your zero turn mower. This will ensure stability during the lifting process. Avoid inclines or uneven terrain to prevent the mower from tipping over.

Step 3: Engage the Parking Brake

Before you begin the jacking process, engage the parking brake on your zero turn mower. This adds an extra layer of safety by preventing the mower from rolling while it’s being lifted.

Step 4: Place Wheel Chocks

How To Jack Up a Zero Turn Mower

Position wheel chocks around the wheels that will remain on the ground. This will prevent any accidental movement, adding an extra layer of safety during the lifting process.

Step 5: Identify the Lifting Points

Every zero turn mower model is different, so it’s crucial to identify the designated lifting points. Refer to your mower’s manual to locate these points. Typically, lifting points are located on the frame near the front or rear wheels.

Step 6: Position the Hydraulic Jack

Place the hydraulic jack under the identified lifting point. Make sure the jack’s saddle is correctly positioned to lift the mower evenly. Pump the jack handle to raise the mower slowly. Keep a close eye on the process to ensure stability.

Step 7: Insert Jack Stands

Once the zero turn mower is lifted to the desired height, insert the jack stands under the frame at the designated lifting points. Slowly lower the mower onto the jack stands. Ensure that the weight is evenly distributed on all the stands.

Step 8: Double-Check Stability

After lowering the mower onto the jack stands, double-check its stability. Gently shake the mower to ensure it’s securely positioned on the jack stands before starting any maintenance or repairs.

Step 9: Perform Maintenance Tasks

Now that your zero turn mower is safely elevated, you can perform various maintenance tasks, such as:how to jack up a zero turn mower

Blade Sharpening: Use this opportunity to sharpen or replace mower blades for efficient cutting.

Under-Deck Cleaning: Clear debris, grass clippings, and other buildup from the mower deck.

Inspections: Check for any signs of wear, loose nuts or bolts, and address any issues you find.

Step 10: Reverse the Process

Once you’ve completed the necessary maintenance or repairs, carefully reverse the jacking process. Use the hydraulic jack to lift the mower slightly, remove the jack stands, and then slowly lower the mower back to the ground.

how to jack up a zero turn mower

Don’t Miss: Never do this when cutting down a tree

Pro Tip

Always refer to your zero turn mower’s user manual for specific instructions and recommendations regarding jacking points and maintenance procedures. Regularly inspect your equipment and address any issues promptly to ensure optimal performance.


Which Jack is the Right Choice for Your Zero-Turn Mower?

  1. Hydraulic Jack

Mechanism: Hydraulic jacks operate on the principle of Pascal’s law, which states that a change in pressure applied to an enclosed fluid is transmitted undiminished to all portions of the fluid and to the walls of its container.

How it Works: When you pump the handle of a hydraulic jack, it moves a piston in a cylinder. This action increases the pressure of the hydraulic fluid inside the cylinder. The high-pressure fluid then transfers force to another piston, lifting the load (in this case, your zero-turn mower).

  1. Scissor-Action Lift:

Mechanism: Scissor-action lifts use a scissor-like mechanism, typically made up of linked bars, to elevate the load.

How it Works: As you pump the handle or turn a crank, the linked bars of the scissor mechanism unfold, causing the platform to rise. The mechanical advantage of the scissor design allows for efficient lifting.

  1. Pneumatic Jack

Mechanism: Pneumatic jacks use air pressure to lift objects.

How it Works: Compressed air is directed into the jack’s chamber, causing a piston or a lifting mechanism to move. As the piston moves, it raises the load. Pneumatic jacks are known for their speed and efficiency in lifting.

  1. Drill-Turned Lift

Drill-turned lifts typically use an electric or cordless drill to power the lifting mechanism.

How it Works: The drill is attached to a gear or mechanism that drives the lifting function. When you activate the drill, it turns the gears, resulting in the lifting of the load. This type of jack is often chosen for its convenience and speed.

Choosing the right jack for your zero-turn mower involves considering factors such as lifting capacity, portability, ease of use, and maintenance requirements. Each type of jack employs a different mechanism to achieve the lifting action, and the choice depends on your specific needs and preferences.

You may like: How To Scalp A Lawn

Caution and Safety Tips

  • Never work under a mower supported only by a hydraulic jack.
  • Always use jack stands to secure the mower before performing any maintenance.
  • Avoid overextending the hydraulic jack. Lift the mower only as high as necessary.

Remember, safety should always be the priority when jacking up a zero-turn mower. Following these steps and precautions will help you perform maintenance tasks with confidence and reduce the risk of accidents.

Final Thoughts

Maintaining your zero turn mower is essential for its longevity and performance. By following the steps on how to jack up a zero turn mower, you can safely jack up your mower and perform necessary maintenance tasks. Prioritize safety, use the right tools, and consult your mower’s manual for specific guidelines. Now, go ahead and give your zero turn mower the care it deserves!

Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top